| No. |
Item |
Description |
Altered
Ver. |
| 2550X01 |
Vector parts |
Fixed the defect: Text may not be displayed on vector parts depending on the font size (such as 20 points) in an X1 screen program. |
|
| 2550X02 |
Trend graph parts |
Fixed the defect: When a trend graph is enlarged in the Y direction and is scrolled using the scroll bar (horizontal), the reference position in the Y direction is shifted. |
|
| 2550X03 |
V8-compatible memory card |
Fixed the defect: When the V8-compatible memory card function is used, error 163 may occur when the V10 series unit is rebooted. |
|
| 2550X04 |
V8-compatible memory card |
Fixed the defect: When a ".mcd" file that was used for a V8 or older screen program is converted to "MCMHEAD.BIN" and "REC0000.BIN" using the editor and used with a V9/V10 screen program, the recipe information output device memory n+1 on the V10 series unit becomes "5" indicating that the memory card format and setting data do not match. |
|
| 2550X05 |
Messages |
Fixed the defect: Adjustment of line breaks and text positions using spaces for message boxes on the V10 series unit do not function correctly. |
|
| 2550X06 |
Local mode |
Fixed the defect: When the Local mode screen -> [Communication Settings] is displayed and the Ethernet connection PLC page is changed to the communication unit connection PLC page, the communication parameters still display the settings for the Ethernet PLC. |
|
| 2550X07 |
Serial communication |
Fixed the defect: When the time-out time is very short, timeout errors and format errors may occur during serial communication with a PLC. |
|
| 2550X08 |
Stand-alone MES function |
Fixed the defect: When the stand-alone MES function is used, the value written as a "2-word, DEC-" numerical value may not be reflected correctly in the database. |
|
| 2550X09 |
Windows fonts |
Fixed the defect: Message display parts that use Windows fonts may not actually be displayed using Windows fonts. |
|
| 2550X10 |
Ethernet TCP/IP communication |
Fixed the defect: When communicating with a PLC via Ethernet TCP/IP, the V10 series unit may freeze when reading PLC device memory according to an event timer macro. |
|
| 2550X11 |
Storage removal |
Fixed the defect: Although the [General Settings] > [Switch/Lamp] > [Clear the status of Storage Removal when switching a screen (V8 compatible)] checkbox is selected, the storage removal status is not canceled even if the screen is changed over after pressing a switch with [Function] set to [Storage Removal] and a drive specified. |
|
| 2550X12 |
Device memory map |
Fixed the defect: When the following settings are made on the device memory map, values are written shifted by one address.
- The transfer destination is a double-word device memory.
- The data type is double-word |
|
| 2550X13 |
Ethernet TCP/IP communication |
Fixed the defect: When a disconnection request is received from a counterpart device in Ethernet TCP/IP connection, connection cannot be reestablished. |
|
| 2550X14 |
Improvement of vulnerability |
Fixed the defect: When an invalid screen program is opened, the Emulator is terminated due to an error.
JVNVU#94011267 |
|
| No. |
Item |
Description |
Altered
Ver. |
| 2550Q01 |
Ethernet communication |
Fixed the defect: When using a Windows 11 desktop computer to connect TELLUS HMI with a PLC via Ethernet (UDP), TELLUS starts up normally after the computer boots but a transmission error may occur about five minutes later. |
|
| 2550Q02 |
Trend graph parts |
Fixed the defect: When a trend graph is enlarged in the Y direction and is scrolled using the scroll bar (horizontal), the reference position in the Y direction is shifted. |
|
| 2550Q03 |
Local mode |
Fixed the defect: When the Local mode screen -> [Communication Settings] is displayed and the Ethernet connection PLC page is changed to the communication unit connection PLC page, the communication parameters still display the settings for the Ethernet PLC. |
|
| 2550Q04 |
Serial communication |
Fixed the defect: When the time-out time is very short, timeout errors and format errors may occur during serial communication with a PLC. |
|
| 2550Q05 |
Windows fonts |
Fixed the defect: Message display parts that use Windows fonts may not actually be displayed using Windows fonts. |
|
| 2550Q06 |
Ethernet TCP/IP communication |
Fixed the defect: When communicating with a PLC via Ethernet TCP/IP, the V10 series unit may freeze when reading PLC device memory according to an event timer macro. |
|
| 2550Q07 |
Storage removal |
Fixed the defect: Although the [General Settings] > [Switch/Lamp] > [Clear the status of Storage Removal when switching a screen (V8 compatible)] checkbox is selected, the storage removal status is not canceled even if the screen is changed over after pressing a switch with [Function] set to [Storage Removal] and a drive specified. |
|
| 2550Q08 |
Device memory map |
Fixed the defect: When the following settings are made on the device memory map, values are written shifted by one address.
- The transfer destination is a double-word device memory.
- The data type is double-word |
|
| 2550Q09 |
Ethernet TCP/IP communication |
Fixed the defect: When a disconnection request is received from a counterpart device in Ethernet TCP/IP connection, connection cannot be reestablished. |
|
| 2550Q10 |
Improvement of vulnerability |
Fixed the defect: When an invalid screen program is opened, the Emulator is terminated due to an error.
JVNVU#94011267 |
|
