Home >
V8 >
Lineup > V808N series >
V808N series

Product information page of Programmable Display V8 Series

V808Nseries

V808iSDN/V808SDN

V808iSDN

V808SDN

V808iCDN/V808CDN

V808iCDN

V808CDN

Specifications
Dimensions
System Configuration
Download
Models

Genneral Specifications

		V808xSDN	V808xCDN
Power supply	Rated voltage	24V DC
	Permissible range of voltage	24V DC±10%
	Permissible momentary power failure	Within 1ms
	Demand (maximum rating)	23W or less	20W or less
	Inrush current	20A, 2ms	20A, 1ms
Insulation resistance		500V DC, 10MΩ or more
Physical environment	Operation ambient temperature	0°C ～ +50°C
	Storage ambient temperature	-10°C ～ +60°C
	Operation ambient humidity	85%RH or less (without dew condensation, Max. wet bulb temperature: 39 or lower) _*1
	Resistance to solvent	No attachment of cutting oil or organic solvent
	Atmosphere	Not exposed to corrosive gas or conductive dust
	Operation altitude	2,000 meter or lower
	Contamination level _*2	Level 2
Mechanical	Resistance to oscillation	Vibration frequency: 10～150Hz, acceleration: 9.8m/s ²(1.0G) pulsating width: 0.075mm, X,Y,Z: 3 directions 1 hour each way
Mechanical	Resistance to shock	Pulse shape: half-sine, peak acceleration: 147m/s ²(15G), X,Y,Z: 3 directions, six times each way
Electric	Noise proof	1500Vp-p (pulse width 1 s, pulse rise time : 1ns)
Electric	Static discharge	Complies with IEC61000-4-2, contact: 6kV, air: 8kV
Installation conditions	Grounding	Grounding resistance : Less than 100Ω , FG/SG separation
	Structure	Protect structure: Front panel: Compatible with IP65 (when water-proof gasket is used.) Rear cover: Compatible with IP20 Form: Single unit Installation method: Panel mounting
	Cooling system	Natural air cooling
	Weight	Approx.1.5kg
	Dimensions W×H×D(mm)	233.0×178.0×65.8
	Panel cutout (mm)	220.5×165.5 (+0.5/-0)
Case color		Gray
Material		PC/ABS

*1 Keep wet bulb temperature under 39 to avoid an accident.
*2 Contamination level is an index that shows the incidence rate of conductive substance. At Level 2, only nonconductive substance is produced, but a temporary conductive state may occur due to dew concentration.

Performance Specifications

		V808iSDN	V808iCDN	V808CDN
Display specifications	Screen memory	12.5MB		4.5MB
	Display device	TFT color LCD
	Resolution W:H(dots)	800×600	640×480
	Display size	8.4 inches
	Colors	65,536 colors (without blinks)/ 32,768 colors (with blinks)
	Backlight	LED
	Backlight Auto OFF	Lit in normal (Set by the user)
	Power lamp	Lit in normal condition, blinks in alarm condition such as blowout of backlight bulbs
	Contrast adjustment	Fixed
	Brilliance control	3 levels (Adjusted to 128 steps by macro command)
Number of characters	1/4 size	100 columns × 75 lines	80 columns × 60 lines
	1-byte	100 columns × 37 lines	80 columns × 30 lines
	2-byte	50 columns × 37 lines	40 columns × 30 lines
Enlargement of characters		X: 1～8 times Y: 1～8 times
Touch switch	Switch resolution	Analog: 1,024×1,024
	Mechanical life	1 million times or more
	Surface treatment	Hard coating, Non glare finish 5%
Function switch	Number of function switches	8 switches
External interface	D-Sub 9 pin (CN1)	RS-232C, RS-422/485, Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 ^*3bps
	Modular 8 pin (MJ1/ MJ2)	RS-232C, RS-422/485 (two-wire system), Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200bps
	CF card interface	Compatible with CompactFlash ^TM
	Ethernet	Complies with IEEE802.3 Baud rate: 10Mbps, 100Mbps Cable: 100Ω Unsealed twist pair, Category 5, Max length: 100m
	USB	Type A, Type B (Ver1.1)
Clock & Back up memory	Battery	Coin-type lithium primary battery
	Back up memory(SRAM)	512KB		128KB
	Back up period	5 years (Ambient temperature 25°C)
	Calendar accuracy	Gap±90 sec. per month (Ambient temperature 25°C)

*3 Only when connected with SIEMENS MPI.

Interfaces

Dimensions/Part names

( mm)

Side view	Front view	Rear view

Bottom view	Panel cutout

Part Names

Display
Power lamp
Function switch
Connector for communication unit (CN5)
Connector for optional unit (CN7)
Battery holder
CF card slot (CF)
Dip switch
Power supply

Modular 8-pin for serial port (MJ1)
Modular 8-pin for serial port (MJ2)
D-Sub9-pin for serial port (CN1)
100BASE-TX/10BASE-T port (LAN)
USB-B (slave)
USB-A (master)
Screw port for fixing USB cable lock
Inlet port for fixing USB cable

System configuration of V8i series/V8 series

V8i series/V8iC series

V8 series/V8C series

Download data of V808N Series

Item	Description	Language	Updated date	File size
Hardware Specifications	Hardware specifications for V8 series 2016NE3	Eng	12/3/2012	7，827KB	Download
Connection Manual	The connection and communication parameters for the V8 series and controllers are explained in details. 2201NE12	Eng	8/10/2012	34，912KB	Download
CAD	CAD Data of V808SN series	Eng	7/10/2009	7，394KB	Download
CAD	CAD Data of V808CN series	Eng	7/1/2009	9，653KB	Download

V808

【Functional specification】

i:	High-performance type (With built-in LAN port and optional unit port )
None:	Standard type (Without built-in LAN port nor optional unit port *)

*V808iCN: without optional unit port

【Device specification】

S:	TFT color LCD (SVGA)
C:	TFT color LCD (VGA)